Hangzhou Aotuo Mechanical And Electrical Co., Ltd.
Make dry bulk port transfers more efficient, greener and smarter
Add to Cart
ATXM-B screw ship unloader is a track movable coal unloader. Coal unloading can be performed in mobile operation.
| Capacity | 400~1500t/h (calculated by coal bulk weight) |
| Applicable Ship Type | 800~50000 DWT |
| Horizontal arm horizontal rotation angle | ±135° |
| Horizontal arm pitch angle | 30° For Lifting Up And 30° For Probing Down |
| Vertical arm swing angle | 30° For Inner Swing And 40° For Outer Swing |
| Energy Consumption | <1 kWh/t |
| Noise | ≤ 80dB |
| Dust Emission Concentration | ≤ 10 Mg/M³ |
Characteristic of coal unloader as below:
1. Environmental protection-coal unloading without dust escape; high Efficiency & High output, Capacity 500-1500t/h;
2. Long service life - high wear-resistant materials are used in coal unloader reclaimer and screw blade and conveying pipe.
3. Wide adaptability - suitable for unloading lump coal with 20% water content and 200 mm diameter from 5000-75000 DWT coal bulk carrier;
4. Low energy consumption - about 1 degree per ton of energy consumption. Compared with grab coal unloader, it has obvious advantages of energy saving and environmental protection.
This product is developed by Hangzhou Aotuo, in response to the mandatory requirements of energy saving and environmental protection for coal unloading in the ports. It has a good development prospects for coal unloading special equipment.